If you have several processors or one multi-core processor in your computer, then you can optimize its operation using the CPU Control program. Despite the fact that multiprocessor computers and multi-core processors are no longer uncommon, most programs are still not designed to fully work with them. And therefore such devices cannot show their full potential. It can be fixed.
The CPU Control program (can be downloaded from the link at the bottom of the article) can distribute running processes across certain processor cores. For example, everyone background processes(antivirus, device drivers) should be placed to run in one core. Programs that are often used (browsers, browsers, instant messengers) - second. System processes- in the third. And heavy programs (games, for example) in the fourth or allow them to use all cores.
In addition to what the CPU Control program does, you can also configure the system startup by distributing this process to all cores. I wrote about this.
Using the CPU Control program, you can give any distribution to processes. And the more cores or processors you have at your disposal, the large selection you own. However, it is impossible to say which processes should be optimized, since it depends on the operating system, existing processes, and the processor itself. Therefore, this issue is resolved individually and experimentally. CPU Control makes it easy and safe to experiment with the processor.
After you download the CPU Control program, install it and run it. Before you start optimizing, click on the “Settings” button (bottom right) and select the desired interface language, check the box next to “Autostart with Windows” and “Minimize”. If your computer has 4 cores, check the appropriate box. And click “Close” in this window.
Setting up the CPU Control program
After this, you must select the operating mode in the CPU Control program.
If it is not clear from what has been described how to work with the CPU Control program, then watch the video below.
If you use this program in automatic mode and do not notice an increase in performance, then you should configure it in manual mode. The CPU Control program is far from perfect, and this is especially true for its “Auto” mode. Sometimes it can even slow down your computer. But practice shows that with the help of experiments and the wonderful “poke” method, everything can be adjusted. Moreover, the CPU Control program provides a huge testing ground for experiments.
The CPU Control program serves to optimize the work of many nuclear processors. To do this, the load is distributed across the processor cores in equal shares. This action significantly increases the speed of the computer, especially when launching several applications at once. This application will help modern operating systems family of Windows, in order to perfect the operation of the system-multicore processor combination, since one system is not always able to cope with this.
Therefore, the use of CPU Control when the processor has two or more cores becomes justified and optimal. In those cases when you have to run outdated applications with such a processor, this program will be generally indispensable, since it will significantly increase the speed of launching such programs and will help avoid any inconsistencies in work running program and processor.
CPU Control does not take up much disk space - just over one megabyte, which by modern standards is negligible, especially for such applications. Appearance The CPU Control program is extremely minimalistic. The user has access to manual distribution of processes between cores, which will be of interest experienced user. For everyone else, there is an automatic mode, when processes are distributed in equal shares among all cores. And besides the fact that the program interface is multilingual, it is also possible to download CPU Control for free. Such a number of advantages for a small utility is an invaluable find.
The settings are also simple and intuitive. In them, the user is given the right to choose the mode for controlling the operation of the processor, as well as the method for autostarting the application.
That's why, with such powerful and useful features, CPU Control is unique program, which will appeal to any user who wants to optimize the performance of a multi-core processor, as well as speed up the simultaneous operation of several applications. CPU Control will be able to provide this with a minimum of resource consumption and optimally distribute the load on the central processor.
With the standard system setup, tasks are piled on processes chaotically. Thus, its performance decreases, and it begins to “freeze”. If configured correctly, the system will operate smoothly and without freezing. It is for this setting that CPU Control was created. It regulates which core will run a particular process. Adjusts either automatically or manually. But in any case, the system performance will increase.
The application runs on Windows 7, Vista and XP. For Windows 8 you will need to run in compatibility mode.
Once you download and install CPU Control, you'll be up and running in no time. After launch, you will see a list of all active processes (on the left) and operating modes (on the right). There are five of them in total: automatic (every new task is thrown onto the next core), manual (independent selection with the ability to create several scenarios for one process), all on the first core, all on the second core and passive mode (everything happens according to the Windows script) .
The program has not been updated for a long time due to its useful, but meager functionality. After correct settings Performance will increase, but not by much. And since the power modern computers quite large and easy to use this application there is no particular need.
Key Features
RMClock. A program for monitoring processor load, as well as tuning its performance. She can perform dynamic settings frequency, voltage level, display temperature and battery charge information. Supports work with multi-core processors and multiprocessor systems.
CPU Burn-in. An application for overclocking processors to their maximum performance. Overclocking is carried out by warming up the processor, during which the level of stability of its operation is controlled and operating errors are blocked.
CPUCool. Utility for reducing equipment temperature, changing FSB frequency, displaying temperature data motherboard, about voltage, fan speed. Allows optimization of CPU operation.
After launching the utility, the following window will open in front of you:
Interface
We select manual mode in it, then mark the desired core.
Kernel selection
You can allocate several tasks simultaneously to one processor or one task to several cores at once.
Selecting tasks
The remaining kernels need to be configured for the remaining processes.
If you notice that the computer clearly does not have enough processor performance, try to independently transfer all processes except faulty ones (for example, a “braking” gaming application) to the second or fourth core for processing. Other cores will take care of the problematic processes.
If you don’t want to rack your brains over the settings, turn on automatic mode and the program will be able to optimize the work itself.
Auto mode
Processor optimization is the most important moment for all multi-core computers. With CPU Control you can achieve performance gains in minutes.
We are glad to welcome you to our portal website, where you can download torrent movies, games, TV series and others useful files completely free and without registration. And even though we opened quite recently, we have already managed to win the trust of numerous users. We have no doubt that you will soon become one of our regular visitors.
The most interesting things await you here torrent games which will help you relax after a hard day and just have fun. The main feature of downloading games is that you very quickly gain access to even the largest file, thanks to the distribution from those who have already downloaded it. That is why we strongly recommend not deleting downloaded files from the program, so that all users can use the service equally.
Many network users have heard the phrase more than once: yes, you can use a torrent download movies.
But what kind of animal is this and how to treat it? It's simple. Torrent is a special program that allows users to exchange files. Please note that our website does not contain electronic versions of films, TV series and other files. The download occurs directly from the user’s computer, and if he is not online, the program will find other available sources. When you start downloading automatically includes you in the distribution of the file you are interested in. This can be clearly seen in the program, because downloading occurs in segments. This may sound too complicated, but in reality you go to the site, select the file you like and download it. Once it is added to the download, no further action is required from you. The program will let you know when the download is complete.
Yes, at least because we have collected the latest and most popular new products in the most popular categories: