Very often on iPhone 5 / 5s / 6 / 6 Plus the display / screen begins to move away from the body. The Heart of the Problem: Data Design iPhone models is such that in metal case a plastic frame is inserted, and the display module is glued into this frame; due to different voltages, the display begins to come off.

Why does the display on my iPhone come off? This can happen for many reasons:

1) The body is bent or the corner is wrinkled– under voltage, the glass begins to peel off from the plastic frame. This is the same as taking a plate and trying to apply a ruler to the bottom; in this case, the ruler will either bend back or burst. The display on the iPhone acts as a ruler.

What to do if the screen on your iPhone comes off? If you have this situation, then you need to first eliminate the cause, and only then glue the display / screen back to the plastic frame, it can be either or.

2) Due to iPhone drops and dust the glue no longer holds the display and plastic frame tightly. This is often combined with the first point. I dropped my iPhone and the screen came off. The display shakes when you press on a corner, in most cases it is the upper right corner, where the frame is thinnest and there is the least amount of glue due to design features.

If you do not come to the service on time, the display begins to come off more and, as a result, the touchscreen or screen cable is damaged. This display is for replacement only. Therefore, we recommend that you promptly contact the service with this problem so that. This work is done within 1-3 hours. The glue must dry thoroughly.

3) iPhone 5 / 5s / 6 / 6 Plus can be disassembled through the screen, which means that if the glue between the plastic frame and the LCD screen is of poor quality or dust has clogged there, then after opening the iPhone, for example, to replace the battery, the display may begin to peel off. It is better not to put off this problem and ask the service to fix it.

4) The fastenings of the plastic frame are faulty. In case of falls or unsuccessful openings, the antennae on the plastic frame may be broken, in this case, no matter how well the display is glued to the frame, the screen will still move.

If you are faced with the problem that the display is coming off the iPhone body, do not be discouraged; contact us at i-Service in time, your problem will be resolved in the shortest possible time.

join us V

Today we will talk about one of the most popular iPhone 5/5s failures. Many users complain about the screen squelching and the frame peeling off the glass. In order to understand why such a defect occurs, let’s take a brief look at the design of the display itself.

Starting with iPhone 4 Apple company began producing so-called display modules, which combined glass and a matrix as one whole. The idea of ​​a single-piece display module appeared along with Retina or IPS technology, which produced a high resolution screen and viewing angle.

Returning to the question of a defect that manifests itself over time, it is worth noting one very important point! The display module is glued to the frame last and this is all done manually, which entails the human factor. At the output we have low quality on working with the frame and display module, non-compliance with production standards and violation of sizing technology.

The statement above is precisely the most common case! The frame is either broken or the factory glue has come loose.

This kind of problem can happen in several main cases:

1. Mechanical damage;
2. Moisture ingress;
3. Battery swelling.

Why is screen play dangerous?

When the screen plays, a gap is formed into which dust and dirt get in, which can lead to failure of both the modular parts of the iPhone and its components. motherboard. We should not forget that it is the frame that holds the display module in the case, and if it fails, we have a high probability of failure of the display!

MyAppleSpace Service Center offers a solution!

Our craftsmen completely re-glue the frame with a special glue that does not harm the matrix and can withstand even mechanical damage. The procedure is carried out within 30 minutes and you get a fully functional display module without any defects!

Attention!

Unlike other service centers, we offer frame replacement with further warranty obligations, and not replacement of the display module. We save your money and always try to offer more than anyone else service center!

Apple devices are considered reliable because they are assembled from high-quality parts, so the screen on an iPhone rarely comes off. If the screen does come off, a gap is visible near the body (formed when the device was dropped or for unknown reasons), do not rush to buy new iPhone. Such damage can be eliminated by replacing the display module (glass with screen). Wherein appearance your iPhone will be the same as when you purchased it.

Common Causes of Display Module Misalignment

If you notice that the screen is moving away from top corner iPhone frames(the appearance of the case has changed), the damage may have occurred when the smartphone was dropped. However, it is not always possible to find out why the glass came away from the body and the gap at the top became visible.

The main reasons why the screen comes off and a gap is visible near the body are:

• swollen battery
• frame deformation (if the device falls)
• manufacturing defects
• dust particles getting inside the iPhone

If the smartphone has been dropped and its appearance has deteriorated, a gap at the top has become visible, the glass has come off, or the touchscreen has begun to malfunction, immediate screen repair is necessary.

How to fix a device defect

If the screen on your iPhone comes off a little, disassemble the smartphone before ordering the display module (screen and glass). It may be enough to clean the device a little or replace a failed battery.

If the screen comes off and there is a gap visible, but you are not sure whether the module needs to be replaced, try the following:

• The battery is swollen - replace the battery
• tighten the screws, perhaps when the device was dropped, the elements moved away from the case
• The glass has come off a little, a gap is visible at the top - use optical glue
• dust has entered - clean the device components with a brush and apply optical glue

If after these steps the screen still moves slightly away from the body, you need to replace the glass by replacing the entire display module.

How to change iPhone display module

All iPhone models differ from other smartphones in that the screen can only be replaced along with the glass by disconnecting the cable. Therefore, if the device has fallen and a gap begins to appear in the upper corner, you need to disassemble the iPhone.

Replacing the display module when removing the gap in the upper corner is a rather complicated type of repair, however, you can try to fix the defect (the glass comes off) yourself.

To change glass, you need to purchase:

• new display module
• specialized tools for smartphone repair
• tweezers for neatly separating the frame, disconnecting the cable and removing the old module
• special hair dryer for heating hot melt adhesive

After installing the new display module, make sure that the glass does not come off and connect the cable. Assemble your smartphone (any iPhone model) and make sure that the top corner fits snugly against the body.

The consequence of parts of the display module falling off may result in the appearance of certain defects. Therefore, if you do not know how to fix the breakdown or cannot independently eliminate the reason that the screen moves slightly from the upper corner of the case (the glass comes off), seek help from experienced specialists.

Professional iPhone display module repair

If the screen comes off a little and you don’t know how to fix it, order the services of experienced specialists on the Yuda website. Certified technicians who service all iPhone models will quickly determine the reason why the display module is starting to come off and promptly fix the problem.

YouDo performers are beneficial for many reasons.

Hi all! The topic of this article is familiar to me firsthand - the whole point is that almost all iPhones to which I have access (phones of relatives, friends), clicks are heard when I press the screen. Somewhere less, somewhere more. But they exist! Moreover, I observe similar outrages among the most different models- among them are the iPhone 6S, SE, and even 7 Plus.

What can I say, on my “old” iPhone 5S the display started clicking a few months after purchase. And it still does this, except that the location of the crunch has changed - before it was the lower left corner, but now it is the upper right :) So the phenomenon of a “loose screen” is not such a rarity for the iPhone.

Let's talk about this in more detail? Why not?! Go!

Why does the iPhone screen make a clicking sound when pressed?

The answer is “Captain Obvious” - the display clicks because it is not fully installed. You try to put it in place, there is a click, but after a while it pops out again. Why can such a situation even occur? Here are some reasons:

If the iPhone fell, then everything is clear. And if not, but there are clicks? Is this generally the norm or a defect? Let's figure it out.

iPhone screen clicking - warranty case or not?

Of course yes. This is a defect and the service center is responsible for your device. So if the guarantee is still valid (), then it makes sense to take advantage of it.

In principle, there is nothing more to write here - you found clicks and crunching sounds, take your iPhone under warranty (), they will fix everything for you.

Another thing is that a large number of users either do not notice similar problems, or (like me) they are too lazy to go somewhere and give the iPhone for repair :) As my personal experience, you can do the same: the iPhone 5S, four years after the crack was detected, works perfectly - its display has not fallen off or come off completely.

But if your iPhone is waterproof (models 7, 8, X and almost certainly all subsequent ones), then I would advise you to take this problem more carefully - it will be very unpleasant if water gets through the gap between the case and the display. Because moisture ingress is no longer a warranty case :(

What else can you do about the crunching of the display?

If you cannot use warranty service for some reason, then there are not many options to somehow fix the problem with constant clicks of the iPhone module:

Attention! If you decide to do everything yourself, then be very careful and careful - iPhone technology is fragile, you never know what can happen...

I repeat that it is better to do all of the above only if the official guarantee has already expired. If its expiration date has not yet expired, then feel free to take your iPhone to the service center and let the service center specialists deal with it - after all, this is their job!

P.S.S. If your iPhone display is crackling, then click “like” and press the buttons social networks. Let's see how many people are affected this problem? I've already clicked, let's go! :)

IPhone 5 screen comes off - find the reason and fix it

Apple equipment consists of high-quality parts. Thus, the device does not cause inconvenience to users during operation. However, often due to a blow to the smartphone or its fall, so-called screen play may appear - this is the crunching of the display when pressed. The screen may also move far away from the body.

Common causes of screen play on iPhone

If the iPhone 5 screen comes off, just disassemble the device before ordering a new display module. Perhaps the display itself does not need to be changed. The causes of backlash may be:

• The battery is swollen. In this case, you will need to replace the battery, not the display module;
• Due to the fall, some elements of the case may have changed position. We advise you to disassemble your smartphone and check all components. Quite often you need to tighten the screws so that the display does not move away from the phone body;
• Manufacturing defects. If a small part of the screen comes off the case and the components are normal, use a special glue to secure the display and case - YA XUN or UV LOCA optical glue;
• Dust getting into the housing. Because of this, the factory glue no longer seals the external components of the phone. In this case, disassemble the phone, clean the joints of the case and display with a brush, and apply optical glue to reattach them.

Disassembling the phone and replacing the display module

If the screen comes off significantly, the internal components of the phone are not in place and the constant crunching does not allow you to comfortably interact with the smartphone - replace the display module. Let's look at how to carry out the repair yourself.

To carry out the repair you will need:

1. New display module for IPhone 5;
2. Special tools for disassembling the device: screwdriver, plastic spatula, suction cup for detaching the case;
3. Thin tweezers.

To begin disassembling the device, attach a suction cup to the display (on the bottom, but not touching the Home button). Pry off the display, then take the special plastic spatula and open the phone as shown in the picture.

Open the phone's case, but don't try to remove the display completely yet. Place the module at an angle of 90 degrees from the main body of the smartphone. Remove the suction cup from the screen.

Find the three screws shown in the picture and remove them from your device using a screwdriver. Then remove the plug that held them in place.

Use a spudger to disconnect the following three cables:

After disconnecting the cables, disconnect the front panel from the case. The display module also contains elements. The first is the earpiece. The picture below shows the screws that secure the cover to the speaker itself. Unscrew them and remove the protective panel. Then take tweezers and remove the speaker.

Then, using tweezers, remove the front camera and rear microphone modules.

The next element is Home button. Unscrew the screws shown in the figure and remove the protective panel. Then take a plastic spatula and carefully pry up the Home button. Use tweezers to detach it from the bottom of the display.

Find two Phillips screws on both sides of the frame and unscrew them. Next, remove the 2 screws that secure the display shield. A total of 6 screws need to be unscrewed.

Remove the shield. You will be left with the old display module without any parts. Replace it with a new module and assemble the phone, following all the steps in the instructions, but only in reverse order.