Z-2 USB is a desktop proximity reader.

Designed to read license plates or key fobs of EM Marin, HID ProxCard II, Mifare (read only), Mifare Ultralight (read and write) standards and transfer data to a computer via the USB interface.

Distance from the reader to the computer: no more than 3 m, power supply: from the USB port.

Used in the composition various systems identification, personalization, discount and payment systems, rental points, etc.

Operating frequencies: 125 kHz, 13.56 MHz (simultaneous).

ID reading range: 4 ~ 8 cm.

Sound and light indication of operation.

Operating temperature (indoors): from 0 to +50 °C.

Color: matte black.

For Z-2 USB. All Windows x32 and x64, except Win2000 and WinMe. For Windows 10, 8 and 8.1 you need to disable (temporarily) blocking unsigned drivers. How to do this is described inside the archive. Version 2.12.26.

How to install drivers for Z-2 USB. Version 2.0.

Incorrectly installed drivers. Use if during installation the system requests non-existent files or there are other signs of inadequate driver operation. All FTDI devices and drivers are removed. Before running remove.bat with administrator rights, it is advisable to disable all USB devices(except mouse and keyboard). Version 2.08.28.

Free, certified Z-2 USB for 1C:Enterprise. Version: 1.4.5.

Firmware for Z-2 USB:

• Factory for Z-2 USB. Version 230.
• for Z-2 USB. Differences from version 230 - improved reading of Mifare student cards, increased pumping time before the team. (Same as on RD_ALL). Version 231.
• for Z-2 USB. Displays the card number in the format: 4 bytes in decimal form, always 10 characters, i.e. if there are no leading characters, then ZERO. Version 127.
• for Z-2 USB. Output card numbers in 5 byte format. Translation to new line. Version 128.
• for Z-2 USB. Support for 7-byte Mifare cards. Version 110.
• for Z-2 USB. Does not display the "NO CARD" message on the second line of the message. Version: nocard.
• for Z-2 USB. Displays the card number in Wiegand-24 format (8 digits), without a comma between them, without suppressing the leading zeros, without “NoCard”, there is a line feed. (Decimal format without nocard). Version: 10.51.54.8.
• for Z-2 USB. Output card number in Wiegand-26 format without end of line character, carriage return. Version 114-no_CRLF.
• for Z-2 USB. Output number in Wiegand-24 format (without facility code). Version: 114-w24.
• for Z-2 USB. Outputs the card code to the COM port in a format similar to Z-2 USB MF (for mifare cards). Version 240.
• for Z-2 USB. Reads only 125 kHz cards: EM-Marin and HID. The firmware is relevant for double standard cards (EM-Marin and Mifare are fused into the same plastic), and allows the multi-format reader to read only one card format. Version 124-125 kHz.
• for Z-2 USB. Reads only 13.56 MHz cards: Mifare. The firmware is relevant for double standard cards (EM-Marine and Mifare are fused into the same plastic) and allows the multi-format reader to read only one card format. Version 124-13.56 MHz.

Description

		Z-2 USB User Manual
		Z-2 USB RFID reader. Firmware. Updated version. Support for 7-byte numbers.
		Driver for Z-2 USB, Z-2 USB MF, Z-2 EHR Adapter and RF-1996 Adapter. All Windows x32 and x64. Except Win2000 and WinMe. For Windows 8 and 8.1, you need to disable (temporarily) blocking of unsigned drivers. How to do this - description inside archive
		Drivers for other operating systems
		Removing incorrectly installed drivers. Use if during installation the system requests non-existent files or there are other signs of inadequate driver operation. All FTDI devices and drivers are removed. Before running remove.bat with rights a
		Z-2 USB and USB/RS422(RS485) reader driver (package for FreeBSD v6.3)
		Z-2 USB and USB/RS422(RS485) reader driver (package for FreeBSD v5.5)
		"SDK Readers" for readers Z-2 USB, Matrix III RD-ALL, Matrix V, Z-2 USB MF, Matrix-III Net disk image with source codes of the Demo program, developer library and drivers. Added support for the Z-2 Base adapter in reader mode. Added to
		PlaceCard software allows using the Z-2 USB or MATRIX-III RD-ALL or MATRIX-V adapter to display card codes in the forms of ACS programs
		CopyCard software allows you to copy EM-Marine, HID (ProxCardII) standard cards to IL-05T, IL-06T, IL-07T cards using the Z-2 USB reader.

Z-2 USB Iron Logic RFID reader. Operating frequency: 13.56MHz&125KHz simultaneously. Reading cards & keyfobs standard: EM Marine, HID ProxCard II, Mifare, Mifare-UL (read and write), Cotag (optional). Reading range: 4-8 cm. Power: USB. Sound/light indication: buzzer signal, two-color LED. Operating temperature: 0°C to +50°C. Case material: ABS plastic. Case color: matte black. Output interface: USB. Size(mm): 110x80x24. Does not have encryption (cryptographic) functions

Peculiarities

Simultaneous operation in two bands 13.56MHz & 125kHz

Power and USB output

Elegant body

Attractive price

Application:

A beautiful and reliable desktop multi-format reader. USB output and power. Simultaneous work with EM Marine 125Khz and Mifare 13.56Mhz standard cards. All this will allow the Z-2 reader to be successfully used for discount and payment systems, rental points, access control systems, identification, personalization and other projects using RFID technology. A development kit SDK-Z2USB is offered for the product free of charge, allowing you to quickly master working with the product, also available for download free programs: - PlaceCard and - CopyCard, which reduce the cost of ACS maintenance when using this product.

• Operating frequency: 13.56 MHz and 125 kHz simultaneously
• Reading IDs: EM-Marine, HID ProxCard II, Mifare, Mifare Plus, Mifare-UL ( read/write), Temic ( read/write), Cotag (optional)
• Reading distance: 4-8 cm
• Power: USB
• Sound and light indication: yes
• Housing material: ABS plastic
• Case color: matte black
• Output interface: USB
• Operating temperature: +5°С +40°С
• Overall dimensions (mm): 110x80x25

Application

Designed for reading and transferring to a computer serial numbers contactless identifiers via USB interface. Simultaneous work with EM-Marine 125 kHz and Mifare 13.56 MHz identifiers. Can be used for discount and payment systems, rental points, access control systems, identification, personalization and other projects using RFID technologies. To quickly master working with the product, the SDK Z-2 USB development kit is offered. Free programs PlaceCard and CopyCard are also available for download, reducing the cost of servicing the access control system when using this product. There is a certified free driver for connecting to 1C.

Instructions

Manual. Reader Z-2 (mod. RD-ALL).
Version: 443 User guide 1291kB 02/23/2019 Download

Instructions for flashing desktop readers Z-2 (mod. RD_ALL), Z-2 (mod. MF), Z-2 (mod. E HTZ RF), Z-2 (mod. E HT Hotel).
Version: 1.0 User guide 789kB 02/08/2019 Download

Instructions for installing drivers for readers and adapters Z-2 (EHT Hotel), converters Z-397 (mod. USB Guard), Z-397 (USB mod.).
Version: 2.0 User guide 754kB 04/24/2017 Download

Instructions for restoring the original (FTDI) PID for readers Z-2 (mod. RD_ALL), Z-2 (mod. MF), Z-2 (E HTZ RF), adapter Z-2 (EHT Hotel), converters Z-397 (mod. USB Guard), Z-397 (USB mod.). User guide 913kB 06/14/2018 Download

Drivers

Driver for desktop readers Z-2 (mod. RD_ALL), Z-2 (mod. MF),adapter Z-2 (mod. E HTZ RF) And adapter Z-2 (mod. E HT Hotel) . All Windows x32 and x64. Except Win2000 and WinMe. For Windows 10, 8 and 8.1 You need to disable (temporarily) blocking of unsigned drivers. How to do this - description inside the archive.
Version: 2.12.26 Driver 5395kB 04/24/2017 Download

Programs

FTDI - FT PROG. Utility to restore original (FTDI) PID for readers Z-2 (mod. RD_ALL), Z-2 (mod. MF), Z-2 (E HTZ RF), adapter Z-2 (EHT Hotel), converters Z-397 (mod. USB Guard), Z-397 (USB mod.). Simplifies driver installation for IronLogic devices. Utility 2103kB 06/13/2018 Download

Removing incorrectly installed drivers. Use if during installation the system requests non-existent files or there are other signs of inadequate driver operation. All FTDI devices and drivers are removed. Before launch remove.bat With administrator rights, it is advisable to disable all USB devices (except the mouse and keyboard).
Version: 2.08.28 Driver 223kB 07/10/2014 Download

Firmware for Z-2 (mod. RD_ALL). Differences from v.230 - improved reading of Mifare student cards, increased pumping time before the command.
Version: 231Download

Firmware for Z-2 (mod. RD_ALL). Displays card numbers in the format: 4 bytes in decimal form, always 10 characters, i.e. if there are no leading signs, then ZERO.
Version: 127 FirmWare 117kB 10/06/2016 Download

Firmware for Z-2 (mod. RD_ALL). The output of card numbers is similar to version 127, but in this case it always displays the number in decimal form and in the form of 8, 9 or 10 characters. Example: factory firmware in the terminal - Mifare 093.11016 1K (0004.08) No card; - this firmware- 137059672; - firmware v.127 - 1482500872.
Version: 10.51.42.74 FirmWare 128kB 10/06/2017 Download

Firmware for Z-2 (mod. RD_ALL). Output card numbers in 5 byte format (HEX). Break to new line. Without no card.
Version: 112 FirmWare 140kB 04/14/2019 Download

Firmware for Z-2 (mod. RD_ALL). Support for 7-byte Mifare cards.
Version: 110 FirmWare 137kB 01/31/2014 Download

Firmware for Z-2 (mod. RD_ALL). Does not display the NO CARD message on the second line of the message.
Version: nocard FirmWare 135kB 10/13/2015 Download

Firmware for Z-2 (mod. RD_ALL). Displays the card number in W24 format (8 digits), without a comma between them, without suppressing the leading zeros, without NoCard, there is a line feed. (Decimal format without nocard).
Version: 10.51.54.8 FirmWare 128kB 07/25/2017 Download

Firmware for Z-2 (mod. RD_ALL). Output card number in Wiegand 26 format without end of line character, carriage return.
Version: 114-no_CRLF FirmWare 117kB 09/08/2014 Download

Firmware for Z-2 USB. Output number in Wiegand 24 format (without facility code).
Version: 114-w24 FirmWare 117kB 03/10/2015 Download

Firmware for Z-2 (mod. RD_ALL). Outputs the card code to the COM port in a format similar to Z-2 USB MF (for mifare cards).
Version: 240 FirmWare 117kB 10/06/2016 Download

Firmware for Z-2 (mod. RD_ALL). Reads only cards 125 kHz: EM-Marine and HID. The firmware is relevant for double standard cards (EM-Marine and Mifare are fused into the same plastic) and allows the multi-format reader to read only one card format.
Version: 124-125kHz FirmWare 141kB 10/13/2015

Retail price:

RUB 2,840

Small wholesale:
CALL!
Large wholesale:
CALL!

Request instructions

Description Z-2 USB

Z-2 USB is a multi-format reader whose operating frequency is 125 kHz and 13.56 MHz simultaneously, as the device works equally well with identifiers such as EM-Marine and Mifare. It has a wide range of uses, since this reader is desktop and can work with many identifier platforms; In addition to those listed, this also includes HID ProxCard II, Mifare Plus, optionally Cotag and for reading and writing - Mifare-UL and Temic. This model popular both in discount and payment systems, and in security control systems. The Z-2 USB is powered, as the name suggests, using a USB cable. The body color is stylish matte black, the body itself is made of ASB plastic. There is sound and light indication to simplify operation. The operating temperature is mostly positive, therefore, when purchasing Z-2 USB, make sure that the room is kept warm, otherwise the device may not work correctly (operating temperature - +5°C +40°C). The overall dimensions of the reader are very small, and therefore convenient - only 110x80x24 mm.

Features of Z-2 USB

• Simultaneous operation in two bands 13.56 MHz and 125 kHz
• Power and USB output
• Elegant body
• Compatible with 1C

Specifications Z-2 USB

• Operating frequency: 13.56 MHz and 125 kHz simultaneously
• Read IDs: EM-Marine, HID ProxCard II, Mifare, Mifare Plus, Mifare-UL (read/write), Temic (read/write), Cotag (optional)
• Reading distance: 4-8 cm
• Power: USB
• Housing material: ABS plastic
• Operating temperature: +5°С +40°С
• Overall dimensions (mm): 110x80x24

In our store you can buy Z-2 USB at a low price, pickup in Moscow or with delivery throughout the Russian Federation. All equipment has passed the necessary certification and has an official 1-year warranty.