Let's say this - if a person does something for the first time, then he can be called a noob in this matter. I have never pasted protective glass on the phone! I've only seen this process once. Therefore, you can safely consider me a noob when it comes to gluing protective glass. In this article I will answer the question - can a noob stick a protective glass on an iPhone well?

So, the glasses were ordered back in October from Aliexpress. They were not tracked in any way after leaving China. Two months passed, my period of protection was extended at my request. As a result, I opened two disputes and the sellers returned my money. But the Russian Post turned out to be to blame (who would doubt it). A couple of days ago they sent me two notifications, saying that your parcels need to be picked up urgently (they have been in the mail for almost 30 days). That is, the postman stupidly did not deliver the notification.

Started from the first glass for iPhone 6 Plus. I ordered from this link.

The glass was in a foam box. To damage the glass inside, even Russian Post would have to try very hard.

Before my first experience, I watched a video on Youtube about proper gluing - I didn’t learn anything new. The essence of the process comes down to wiping the screen with an alcohol wipe and then carefully placing the glass on the screen.

The box contained not only the glass itself in a special case, but also a double set of small napkins: wet (alcohol) and dry. I wiped the screen with them one by one:

Then I took out the glass and peeled it off protective film by pulling the special shortcut. And he carefully placed the glass. And then I was surprised - it fit perfectly and the air came out on its own within 5-7 seconds. No bubbles or other artifacts were found.

The process turned out to be extremely elementary.

Second glass for iPhone 5S I ordered from another seller. Here it already arrived in a small cardboard box. In addition to the same step-by-step napkins, the kit included a Dust-absorber (dust collector). Why is it needed? I simply did the same thing as with the first glass.

Nuance. The glass for the iPhone 5S is slightly larger than the visible part of the screen, so no matter how you sculpt it (even if not evenly), it will still fit perfectly and cover the entire screen, but the iPhone 6 Plus turned out to be snug in width. Therefore, I recommend extreme care so that the glass does not steal a couple of pixels.

Conclusion: And here is the answer to the question in the title. Yes, anyone can glue a protective glass onto their phone without difficulty or experience. If you are afraid of sticking them sloppily, well, order two pieces. It won’t go to waste anyway – there will be a spare one.

How to stick glass on an iPhone?

Additional protective glass for your phone is a modern alternative to conventional screen films. This accessory will protect your smartphone from all types of mechanical damage to the display (scratches, abrasions, cracks from dropping the device).

If you decide to purchase a protective glass for your iPhone, check out the basic tips for choosing this accessory:

• The thickness of the glass determines the level of protection of the phone from falls and shocks;
• select the type of glass - matte or glossy. The second option is cheaper. Glossy products protect the screen from impacts, but not from scratches;
• Frosted glass completely protects your iPhone from bumps, abrasions, drops and glare.

Installing a protective accessory on your phone screen does not require special skills. Let's take a closer look at how to stick protective glass on an iPhone in a few simple steps.

Step 1: Clean the display

Bring workplace in order. Make sure there is no dust on the surface that could end up trapped under the film. Then open the package and place all the elements on a clean, flat surface.

Clean your smartphone screen using a cloth and glass cleaner. Wipe the display surface thoroughly and wait completely dry. This action will remove even invisible dust particles. Try not to touch the iPhone screen directly anymore, so as not to create new stains and specks of dust. Wipes for initial cleaning of the phone are included with the protective glass.

Step 2. Unpacking the protective glass

The next step is to unpack the accessory and prepare it to stick it on your phone. Take the screen and peel off the protective layer, which, once glued, will come into contact with the phone's display. After removing the protective layer, try not to touch the protective glass, otherwise fingerprints will remain on the product.

Step 3. Gluing

Turn the protective glass over to the side that was removed from the film. Place the accessory above the smartphone screen without touching it. Try to match everything as evenly and accurately as possible to avoid uneven gluing.

Further action must be done very quickly. Gradually apply the glass to the iPhone display in the direction from the top of the case to the bottom. Release the film so that the side sections stick to the phone themselves. By cleaning the display well, bubbles will not form.

Step 4. Smoothing the surface

Users do not always know how to stick glass on an iPhone. As a result, the result may not be ideal. To remove small bumps or trapped air, take a piece of microfiber (included with the glass) or a clean cloth and gently wipe the phone, moving from the center of the display to the sides, pressing lightly. In this way, flaws can be eliminated.

A film is also glued to the outside of the protective glass. Remove it immediately after all defects have been eliminated. Now turn on the device and check the responsiveness of the sensor. Fine, additional screen should not affect the smartphone in any way.

Eliminating errors

If too many dust particles and dirt get under the protective glass during gluing, it will be inconvenient to use the smartphone. The sensor may respond less well to touches, and appearance such a phone will not be the best. Many users are wondering how to re-glue the glass on an iPhone and is it possible to do it at all? Yes, you can.

If the accessory does not stick properly the first time, carefully remove it from the display and set it aside on a clean surface. Thoroughly wipe the iPhone screen again and make sure there is no more dust or dirt on it. Only after cleaning the screen, stick the glass again. There is no need to peel off the accessory anymore.

How to remove glass from iPhone?

As a rule, users only need to remove the protective glass in one case - when it breaks during a fall or impact. It is very important to remove the accessory correctly so as not to damage the main display of the smartphone with fragments.

Take a plastic card and use it to pry the edge of the protective glass. Then slide the card under the glass until it is completely removed. This method allows you to create some kind of barrier while waiting for the display and a damaged protective accessory.

The screen of any communication gadget needs protection. Even if you purchased the last one iPhone model, then do not neglect the opportunity to install additional film on the display. This will extend the life of the phone and allow it to look attractive longer. Mechanical damage such as scratches and shocks will not be terrible if you know how to stick protective glass on your phone. The task is not easy, but if you follow the instructions, you can do it at home without outside help.

How to properly stick protective glass on a smartphone

For a beginner, the procedure may seem complicated, but a few training sessions will make you a real specialist. It is worth noting that there is no significant difference in whether we glue protective glass to iPhone 5, other phone models or a tablet. The procedure remains the same. For an inexperienced person, it is better to start from the back panel of the gadget and then move on to the screen.

Required materials and tools

If you just purchased a smartphone, then it is important to understand how to apply protective glass to your phone. The device display is very sensitive to mechanical damage. Just being in your pocket, the gadget will be damaged by coins, fingernails or keys. Even minimal scratches can cause bubbles to appear during application. The same goes for situations where you just want to replace your old phone protection.

For the procedure you will need:

• alcohol wipe;
• dry cloth;
• special liquid for cleaning TV or computer screens;
• tape or dust bag;
• glass.

Step-by-step instruction

An important point is the preparation of the workplace. Choose a room with minimal dust. A kitchen or bathroom is best. There are too many textiles in the bedroom, which attract particles. Such a moment interferes with the correct process and can complicate the procedure. If you don't know how to stick a protective glass on your phone, follow these steps:

1. Wash your hands with soap, then place the equipment, protective glass for iPhone 6 or other phone on a clean, smooth surface.
2. Before starting the procedure, remove the old film from the device. To do this, slightly pull the edge at a 60 degree angle.
3. Use an alcohol wipe or cleaning cloth to remove dirt from your phone screen. This product is sold in hardware stores or made independently. To do this, you need to mix 5:1 water and alcohol, add a little dish gel to it.
4. Rub the display until it shines. If there are dust particles left, we go over the surface with tape or a dust collector.
5. We take the device out of the packaging and remove the film from it.
6. We install the protection so that it matches the central button of the gadget and the speakers.
7. Slide your finger down the center from top to bottom to secure the overlay.
8. We expel the remaining air from the center to the edges using a credit card or a spatula, which is often included.

Do not press too hard on the screen to remove small air bubbles. They will disappear on their own within a few days after the procedure. As a result, you should get a smooth, perfectly even screen coating. Although the tempered glass on the phone is only 0.18 mm thick, it perfectly protects the device from mechanical damage.

Is it possible to re-glue the protective glass on the phone?

High-quality surfaces for iPhone 5s and other gadget models can be reused. To do this, you need to carefully remove the glass and treat the adhesive side with formic alcohol. Wipe it lightly with a cloth soaked in this liquid and let it drain for a while. Then set the protection according to the speaker and button. Using light movements from the center to the edges, expel air and liquid. Small bubbles will disappear on their own within a day.

Video: how to glue protective glass without bubbles

The videos below will tell you how to equip a gadget display at home without the help of a specialist. You will learn how to apply protective glass to phones or tablets. With such a coating, the screen will be reliably protected from negative influences, which will allow it to maintain its attractive appearance longer. The protection will protect the device from scratches and also absorb shock when dropped. However, the sensitivity of your phone's sensor will remain the same.

Many people may drop their phone during use and carry it in their bag, where, in addition to the phone, there are also sharp objects - for example, keys.

Therefore, it is not surprising that after several months of use, scratches appear on the surface, and in some cases, chips and cracks.

However, using modern technologies, you can achieve an extension of the life of the device. An excellent solution is to purchase and glue protective glass.

Visually, it strongly resembles a film designed to solve similar problems.

But such glass is completely transparent and flexible, and due to its increased density it is considered more durable and reliable.

The cost of a protective screen for a phone is an order of magnitude higher compared to film, but the additional money spent is well worth the stated price.

If it is present, the likelihood of the screen suffering from damage is reduced to virtually zero.

Why do you need protective glass?

Read also:Without moisture and dust: TOP-20 protected smartphones ip68

Before you stick a protective glass on your smartphone, let's first get acquainted with its main features.

The main advantages are as follows:

• increased resistance to scratches and damage. Checking this is quite simple - you can easily rub the surface with scissors or a knife. The face covering will not receive any marks;
• absorption of impact energy. Even if the display falls down, its front part will not be damaged. Only cracks in the protective glass will remain on the surface. The structure of the material from which it is made prevents the appearance of splinters;
• reliable fixation. Compared to gluing film, safety glass is easy to glue at home, even if the owner does not have the relevant experience. A special adhesive composition guarantees a strong fixation on the front of the screen. Thus, getting rid of the protective glass will not be easy, which cannot be said about ordinary film, which can be torn off even with a smartphone case.

The use of protective glass is also characterized by a number of disadvantages:

• the device will become heavy and bulky;
• the cost of protective glass is an order of magnitude higher compared to film;
• Extreme care is required during the installation process.

The average display thickness varies from 0.2 to 0.3 mm. The product has 5 base layers:

• oleophobic coating . It is responsible for the comfortable sliding of the user’s fingers across the display, and if fingerprints appear, they can be wiped off with a regular cloth. In addition, the task of the oleophobic coating is to provide comprehensive protection against moisture penetration;
• protective covering . Its purpose is to maintain the integrity of the screen and prevent cracks/scratches;
• anti-reflective coating . Another important layer that prevents dull marks from appearing on the display when using the phone in the sun;
• containment layer . If a situation arises where the user is still able to break it, the containment layer will prevent the appearance of fragments;
• silicone layer . Fixed on the display surface.

How to glue glass on iPhone

Read also:TOP 11 Best Chinese smartphones | Current rating 2019

If you want to familiarize yourself with the correct sequence of actions when gluing protective glass on the 7 series, you must remember that for almost all devices the algorithm of work is the same.

Depending on the name of the glass manufacturer, the contents in the box may vary significantly. As a rule, the kit contains not only glass, but also a microfiber cloth.

In some cases, an alcohol wipe is also present. If, for example, certain materials are not available, you can use alternative means at hand.

So how to properly stick protective glass on a smartphone? The instructions are as follows.

1 If your phone already has old film or glass, you first need to get rid of the coating.

To do this, first remove the cover and then pick up the cover by the edge.

Before performing the procedure, be sure to clean your hands so that you do not leave greasy fingerprints on the surface of the glass during the work process.

If you install them and stick the protective glass on your smartphone, you will see marks every time you use the phone.

2 Prepare your work area in advance.

It can be any flat surface - a table, stool, etc.

To prevent dust and streaks from appearing during the process of gluing the protective surface, we strongly recommend turning on bright light in the room.

3 The next step is preparation. Using cotton pads or an alcohol wipe, thoroughly wipe the surface of the display.

After that, take a microfiber cloth and wipe the screen so that no traces of alcohol, dirt, stains, etc. remain on its surface.

Checking for defects is very simple - just bring the phone screen closer to the light source and check the cleanliness of the coating.

If for one reason or another you cannot completely get rid of dust particles, you should try to collect them using ordinary tape.

Place the sticky side of it on the screen and pull sharply.

Please note that this must be done quickly, since if the tape is slowly peeled off, traces of glue may remain on the surface of the display.

Once the tape is removed, wipe the display again with a dry cloth.

4 Each piece of protective glass includes two films.

First, get rid of the bottom film from the adhesive side.

Offer a protective cover for your display.

Please note that you can only hold it by the edges. Otherwise, marks will remain on the surface.

Align and carefully glue the glass along all edges. Be sure to fit it to the speaker and home button.

Then slowly release the glass - it will begin to stick to the display on its own.

Practice shows that not every person can perfectly glue a new protective glass the first time, since air bubbles may remain under it.

In this case, you can get rid of them with a dry cloth. Just press it on the display towards the edges.

After this, all the air goes outside.

If there is dust under the glass, you need to bend it on the required side and get rid of the dust with tape. Then press the protective glass back onto your smartphone's display.

Now, having familiarized yourself with correct instructions By gluing protective glass on iPhone 5, 6 and 7 series, you will have the opportunity to further save on services service center and independently provide comprehensive screen protection.

We suggest watching video instructions from specialists who talk in detail about how to perform all the steps correctly.

How to stick a protective glass on an iPhone screen

Gluing glass with 3D rounding

Read also:TOP 10 Best budget smartphones with optimal price-quality ratio up to 15,000 rubles. | Review of current models in 2019

If you recently purchased a new one, we strongly recommend that you protect it from screen damage, including chips, scratches, and so on.

This is quite easy to do. We bring to your attention an overview of special protective glass with 3D curves.

These products are designed to provide comprehensive protection to the screen surface from damage resulting from severe impact or contact with sharp objects.

The average layer thickness is only 0.23 millimeters, but thanks to the use of a polymer structure, the smartphone can easily cope with strong impacts.

During production, materials are used that are capable of creating a special barrier that quickly cracks, absorbing impact energy, but at the same time guaranteeing high-quality protection for the screen as a whole.

Compared to conventional glass, 3D curved products offer the following advantages:

• Presence of soft edges. Manufacturers use special PET materials to make the edges of the protective surface. This allows you to achieve high-quality and reliable fixation, and the edges will not crumble or crack. This is not only a convenient, but also a safe solution, since the soft edges will not scratch the owner’s hand when, for example, he takes the phone out of his pocket;
• 3D wrap effect. If, in the case of ordinary glass, only the straight part of the display is covered, gluing glass with 3D curves guarantees comprehensive protection of the entire display of the device. Thus, the extreme curved surfaces will be reliably protected;
• Increased level of hardness. Despite the small thickness, the production material has a hardness of 9H. Today, this is one of the few models that fully meets this indicator;
• Minimum thickness. Using ordinary Chinese glass makes the phone more difficult to use. Branded products always have a thickness of just under a quarter of a millimeter, but this is quite enough for the device to receive high-quality and durable protection over a long period of time.

VIDEO: How to remove protective glass from your phone screen? Removing the old broken protective glass

How to remove protective glass from a phone screen? Removing the old broken protective glass

To stick protective glass on at home, you need to follow the algorithm below.

1 Disinfect your hands so that during the process of gluing the glass, no traces of contamination, including dust, remain on the surface of the display.

Place the film on your iPhone so that each cutout matches the position of the protective layer.

Moisten upper layer your film. This should be done carefully. Wetting is done to allow the squeegee to slide freely over the surface of your device.

Using a squeegee, your next task will be to completely remove the liquid towards the left and right edges.

It is important to perform this procedure in such a way that the protection does not stretch across the surface of the base (display).

After complete removal Liquids from under the screen must be wiped dry.

This can be done using a regular napkin. It is highly recommended to ensure that the space between the film and the screen is free of dirt and dust.

Before you start gluing the ends, you need to wait a little.

They should dry out.

The manufacturer notes that this helps simplify the process of attaching the film.

Stick the protection to the ends of your iPhone without stretching the protective layer.

7 At this point the procedure can be considered completed.

Practice shows that the process will take up to ten minutes of free time.

The developers paid attention to every detail, so gluing the film should not be difficult.

To protect the screen of your device, you need to know how to apply protective glass to your phone. It is much more durable, but at the same time flexible.

The film can only protect the display from scratches, but protective screen It also prevents the formation of cracks after the smartphone falls.

You should be very careful when purchasing universal glass; it may be of poor quality.

Some tips for choosing:

• There are two types of glass: glossy and matte. The first option is cheaper, however, it can only protect the smartphone display from impacts. Before purchasing, check the strength of the glass; it should not bend too much;
• Frosted glass is more expensive and can protect the phone from shocks, falls, and even glare. The disadvantage of such glass is that the color rendering quality of the smartphone display may deteriorate;
• Good glass should have an oleophobic coating. It prevents the coating from getting dirty with grease;
• It is advisable to buy glass options that include special napkins and spare protective glasses;
• The thicker the glass, the higher its strength and level of protection for the phone during shocks and falls.

Glass gluing process

Follow the instructions to add additional protective glass to your smartphone:

• First of all, clean your work area. Many instructions for gluing glass are silent on this point, however, it is very important to remove all dust from the working surface. It is there even if you don't see it.
• Take a clean rag and glass cleaner. Wipe the surface and wait until it dries. This way you will remove the maximum number of dust particles and there will be less chance of them getting under the protective glass;

• Turn off your smartphone during the entire procedure so that the screen does not turn on during the gluing process;
• Take wet wipe to clean and thoroughly wipe the phone display with it. You can purchase such napkins in the hardware department of any store. Wipes for cleaning glasses are also suitable.
• Then wipe the display with a dry cloth to remove streaks and fingerprints;

• Take a protective screen. Peel off the film on it from the side that will be adjacent to the smartphone display;

• Now position the glass - without touching it, position it over the entire screen area. All steps must be done very quickly;

• Now carefully place the glass so that it perfectly covers the surface of the phone and release it. The protective glass will stick on its own. If you have cleaned the display surface well, air and dust will not appear.

What to do if air gets in? If air bubbles still appear, go over the surface of the protective glass with a napkin, pressing lightly so that they go beyond the limits.

After gluing, turn on the smartphone and check the operation of the sensor.

Important! Many smartphone owners are wondering: is it possible to re-stick the protective glass if it comes off? There may be too many dust particles or air under the screen preventing it from sticking. Carefully peel it off, wipe the smartphone display and repeat the sticker procedure again. Reinstalling on an already clean surface may solve the problem.

How to remove the protective glass?

Removing protective glass is much more difficult than removing film. If you glued it incorrectly, remove it using the tab located on the outside of the protective screen.

In most cases, the need to remove the protective shield occurs after a serious fall. When the screen is broken, the glass must be removed as carefully as possible.

The easiest way is to take a plastic card (for example, a regular bank card) and pry off the edge. Then run the card under the entire surface of the screen, detaching it from the device.

Advice! To make the peeling process easier, stick the phone screen in your palms.